1. Home
  2. Products
  3. One-Piece Hose Fittings

One-Piece Hose Fittings

Hose Inserts Naming Rule
The 1st number The 2nd number The 3rd number The 4th number The 5th number
Type of head Type of thread Seal face Bending Tail for hose
Male 1 Metric 0 Unmeaning 0 Straight 1 Braided hose 1
Swaged nut 2 Multiseal 1 45°bended 4 Four wires spiral hose 2
No-swaged nut 2(plus t) BSPP 2 Flat seat 2 90°bended 9 R13/R15 hose 3
Thrust-wire nut 2 (plus w) BSPT 3 Flat with o-ring 3
ORFS 4 24°cone/seat l.t 4
NPT 5 24°cone/seat h.t 5
JIC 6 60°cone/seat 6
SAE 7 74°cone/seat 7
JIS Metric 8 90°cone/seat 8
JIS British 9
B bite type 5 DIN 0 0 Idem Idem
B bite type 5 China metric1 0
B bite type 5 British 2 0
K socket-in type 6 MINE 0 0 Idem Idem
K socket-in type 6 British 2 0
O banjo type 7 DIN 0 0 Idem Idem
O banjo type 7 China metric1 0
O banjo type 7 British 2 0
F flange type 8 SAE 7 3000PSI 3 Idem Idem
F flange type 8 SAE 7 6000PSI 6
F flange type 8 Japanese 8 Round 1
F flange type 8 Japanese 8 Square 3

1, "T"added at the end means back-slip nut, e.g 20511-36-12T; while "W" means thrust-wire nut, e.g 22611-24-24W
2, If you want double hexagon fitting, please add "D" on the conventional part.no, e.g 22611D.
3, If you want 24°multiseal coupling, please add "C" on the part.no of 24°Cone with O-Ring; e.g 20411c.
4, If you need 60°seat at the BSPT thread side, please add "SP" on the part no; e.g 15611SP.

Hose Ferrule Naming Rule
The 1st Number The 2nd Number The 3rd Number The 4th Number The 5th Number
Reinforcement rubber skive
0 0 Fibre braide 0 skive outside 0 R7/R8 8
0 0 1 wire braide 1 non skive 1 unmeaning 0
0 2 wires braide 2 interlock 2 unmeaning 0
0 3 wires braide 3 unmeaning 0
0 0 2 wires spiral 5 unmeaning 0
unmeaning 0
4 wires spiral 4 unmeaning 0
4SP 0
4SH 1
0 0 6 wires spiral 6 Inner teeth aeroquip ohydrofit 1