1. Home
  2. Products
  3. Hose Fittings

Hose Fittings

Hose Inserts Naming Rule:
The 1st number The 2nd number The 3rd number The 4th number The 5th number
Type of head Type of thread Seal face Bending Tail for hose
Male 1 Metric 0 Unmeaning 0 Straight 1 Braided hose 1
Swaged nut 2 Multiseal 1 45°bended 4 Four wires spiral hose 2
No-swaged nut 2（plus T） BSPP 2 Flat seat 2 90°BENDED 9 R13/R15 HOSE 3
Thrust-wire nut 2 (plus W） BSPT 3 FLAT with O-ring 3
ORFS 4 24°cone/seat L.T 4
NPT 5 24°cone/seat H.T 5
JIC 6 60°cone/seat 6
SAE 7 74°cone/seat 7
JIS Metric 8 90°cone/seat 8
JIS British 9
B bite type 5 DIN 0 0 Idem Idem
B bite type 5 China metric1 0
B bite type 5 British 2 0
K socket-in type 6 Mine 0 0 Idem Idem
K socket-in type 6 British 2 0
O banjo type 7 DIN 0 0 Idem Idem
O banjo type 7 China metric1 0
O banjo type 7 British 2 0
F flange type 8 SAE 7 3000PSI 3 Idem Idem
F flange type 8 SAE 7 6000PSI 6
F flange type 8 Japanese 8 Round 1
F flange type 8 Japanese 8 Square 3

1. "T"added at the end means back-slip nut, e.g 20511-36-12T; while "W" means thrust-wire nut, e.g 22611-24-24W
2. If you want double hexagon fitting, please add "D" on the conventional part.no, e.g 22611D.
3. If you want 24°multiseal coupling, please add "C" on the part.no of 24°Cone with O-Ring; e.g 20411c.
4. If you need 60°seat at the BSPT thread side, please add "SP" on the part no; e.g 15611SP.

Hose Ferrule Naming Rule:
The 1st Number The 2nd Number The 3rd Number The 4th Number The 5th Number
Reinforcement Rubber skive
0 0 Fibre braide 0 Skive outside 0 R7/R8 8
0 0 1 wire braide 1 Non skive 1 Unmeaning 0
0 2 wires braide 2 Interlock 2 Unmeaning 0
0 3 wires braide 3 Unmeaning 0
0 0 2 wires spiral 5 Unmeaning 0
Unmeaning 0
4 wires spiral 4 Unmeaning 0
4SP 0
4SH 1
0 0 6 wires spiral 6 inner teeth aeroquip ohydrofit 1